Charging an electric vehicle at home can be one of the simplest and most convenient ways of charging a vehicles battery.

The cost of charging an electric vehicle at home using mains electricity is minimal, though it can be reduced further by taking advantage of overnight off peak tariffs.

If you need to charge your vehicle at a different location where there is no access to a charge point (such as work, friend / family address etc) then you can simply unplug the portable charger and take it with you!

Whilst public charging points can be beneficial for some drivers who require rapid charging rates to maximise range, charging your vehicle at lower speeds over a longer period of time can help to extend battery life and reduce battery capacity degradation.

1. LCD display:

Shows the operating temperature, actual AC charging volatge, current & output power, electricity consumption, charging time etc .

2. Adjustable current:

It can help protect the EV battery and extend battery life. When time is sufficient, choose the lowest current ,and the charger will cut electricity automatically when the battery is full. If time is limited and a faster charge is required, then select the maximum current.

3. Seven protection features:

Overheat protection, overvoltage protection, waterproof protection ,leakage protection, overcurrent protection, undervoltage protection, lightening protection.

4. Easy operation:

Simply connect the plug with the EV's inlet, then the user can simply double click the screen or swipe the RFID card provided to choose the current  output.

5. Containing the intelligent chip:

It can automatically repair minor charging problems while charging. When a fault occurs, the lights will blink in different ways to indicate different problems.

The Zencar portable EVSE chargers are supplied with a free EV cable case / bag which can be used for storage when not in use.

Specifications

  • Manufacturer: Zencar Duosida
  • Connector Type: Type 2 (IEC62196-2) with UK plug
  • Rated Current: Adjustable 6A, 8A, 10A
  • Display: LCD and LED
  • Operating Temperature: -25°C ~ +50°C
  • Colour: White Type 2 Connector / Black Cable
  • Cable Length: 10 Metre
  • Safe and Reliable: The cable is made of flame-retardant TPE (TPU) material
  • Rugged Design: Cable & box can withstand being driven over by a vehicle
  • Weight: 3.6 KG
  • IP Rating: IP54
  • Warranty: 12 Months
  • Certificate: CE, TUV
  • Rated Voltage: 220-250 AC
  • Mechanical Life: 10000

*Plug temperature sensor only available with EU plug (Schuko)

- Connector comes with attached rubber cover, which should be used when the connector is not in use.

- Avoid getting moisture into the connector pins as the vehicle will not charge when moisture is detected. Exposure to excess moisture can result in corrosion to the connector pins, which would not be covered by the 1 year warranty.

- Where possible store the charging cable in a clean dry location.

Compatible Vehicles

Audi A3 e-tron
Audi Q7 e-tron
BMW 225xe Plugin Hybrid
BMW 328e
BMW 330e Plugin Hybrid
BMW 740e Plugin Hybrid
BMW i3
BMW i8
BMW X5 40e Plugin Hybrid
BYD e6
Hyundai Ioniq
Hyundai Ioniq Plugin Hybrid
Hyundai Kona
Jaguar I-Pace
Kia Optima Plugin Hybrid
Kia Niro Plugin Hybrid
Land Rover Range Rover PHEV
Mercedes B Class Electric
Mercedes C350e PHEV
Mercedes GLE 500e
Mercedes S500 PHEV
Mercedes SLS EV
Mercedes Vito E-Cell
MG ZS
Mini Cooper S E Countryman ALL4
Nissan Leaf 2018
Opel Ampera-e
Porsche Cayenne S Hybrid
Porsche Panamera E-Hybrid
Porsche Panamera S E-Hybrid
Renault Kangoo ZE (2013)
Renault Kangoo ZE 33 (2017)
Renault Zoe
Smart Electric Drive
Tesla Model 3
Tesla Model S
Tesla Model X
Toyota Prius PHEV (2016)
Volvo S90 T8 PHEV
Volvo V60 PHEV
Volvo V90 T8 PHEV
Volvo XC60 T8 PHEV
Volvo XC90 PHEV
VW e-Golf
VW Golf GTE
VW e-up!

John A.

Arrived very quickly - plugged the car in - all working well. Ebay review submitted 16/03/2020.